Advanced design, high frequency inverter, high load sustained rate and energy efficient.
Extra small size, convenient, especially applicable for outdoor mobile operation.
Using compressed air cutting gas source, more economic and efficient than flame cutting machine.
Compared with the traditional cutting machine, arc welding is with higher success rate and arc voltage, energy focusing,stronger cutting capability, faster cutting speed, narrow and smooth kerf, less deformation.
Cutting current can continue adjust and accurately.
Protected against overheating,over current, over voltage and under voltage .Safe to operate.
Supplied complete with electrode holder,earth cable, hand-held shield and welding brush.
Model | CUT-30(Single-phase) | CUT-40(Single-phase) | CUT-50(Single-phase) | CUT-60(Single-phase) |
Input voltage(V) | AC220V ±15% | AC220V ±15% | AC220V ±15% | AC220V ±15% |
Frequency(HZ) | 50/60 | 50/60 | 50/60 | 50/60 |
Rated input power(KVA) | 4 | 5.6 | 7.3 | 9.2 |
No-load voltage(V) | 265 | 265 | 265 | 265 |
Output current(A) | 10-30 | 10-40 | 10-50 | 10-60 |
Rated output voltage(V) | 92 | 96 | 100 | 104 |
Rated duty cycle(%) | 60 | 60 | 60 | 60 |
Efficiency(%) | 85 | 85 | 85 | 85 |
Power factor | 0.93 | 0.93 | 0.93 | 0.93 |
Insulation class | F | F | ||
Protection degree | IP21 | IP21 | IP21 | |
Weight(KG) | 6.8 | 7.2 | 7.5 | 22 |
Dimensions(MM) | 385*150* 285 | 385*150* 285 | 480*204*375 | |
Applied welding rod diameter(MM) | 1.6-3.2 | 1.6-3.2 | ||
Cutting thickness(MM) | 1-8 | 1-12 | 1-16 | 1-20 |
Before ordering, please confirm the weight and size of the welding machine with the sales staff